Другие журналы
scientific edition of Bauman MSTU
SCIENCE & EDUCATION
Bauman Moscow State Technical University. El № FS 77 - 48211. ISSN 1994-0408
Machine Building and Engineering Science
Manufacturing Research of Surface Quality and Working Deep Hole Accuracy in the Camshaft
# 11, November 2015
DOI: 10.7463/1115.0827133
# 11, November 2015
DOI: 10.7463/1115.0827133
pp. 31-42
Electrical Discharge Platinum Machining Optimization Using Stefan Problem Solutions
# 11, November 2015
DOI: 10.7463/1115.0826317
# 11, November 2015
DOI: 10.7463/1115.0826317
pp. 60-71
Finite Element Model to Analyze an Installation Load-based Stress-Strain State of the Parts Forming Gas Joint of a Medium-Speed Diesel Engine
# 11, November 2015
DOI: 10.7463/1115.0825549
# 11, November 2015
DOI: 10.7463/1115.0825549
pp. 72-91
Comparison of Epicyclic Gearing Design Methods by Means of Quality Criteria Evaluation
# 11, November 2015
DOI: 10.7463/1115.0823612
# 11, November 2015
DOI: 10.7463/1115.0823612
pp. 92-100
A Forging Hardness Dispersion Effect on the Energy Consumption of Machining
# 11, November 2015
DOI: 10.7463/1115.0823350
# 11, November 2015
DOI: 10.7463/1115.0823350
pp. 101-110
Influence of Cast Iron Structure on the Glass-mold Equipment Operational Defects
# 11, November 2015
DOI: 10.7463/1115.0821978
# 11, November 2015
DOI: 10.7463/1115.0821978
pp. 111-123
Influence of Magnetic Field on Vacuum Arc Discharge Volt-Ampere Characteristics
# 11, November 2015
DOI: 10.7463/1115.0820267
# 11, November 2015
DOI: 10.7463/1115.0820267
pp. 124-135
Influence of Isothermal Quench Schedules on Corrosion Rate in Heat Treatable Al-Si-Mg Alloys
# 10, October 2015
DOI: 10.7463/1015.0820293
# 10, October 2015
DOI: 10.7463/1015.0820293
pp. 1-11
A Direct Kinematics Problem Solution for the Three-degree-of-freedom Parallel Structure Manipulator Based on Crank Mechanism
# 11, November 2015
DOI: 10.7463/1115.0818639
# 11, November 2015
DOI: 10.7463/1115.0818639
pp. 136-152
Measurement of Magnetic Field and Hall Current Modeling in Discharge of Magnetron Sputtering System
# 10, October 2015
DOI: 10.7463/1015.0818660
# 10, October 2015
DOI: 10.7463/1015.0818660
pp. 12-20
Numerically Simulated Impact of Gas Prandtl Number and Flow Model on Efficiency of the Machine-less Energetic Separation Device
# 10, October 2015
DOI: 10.7463/1015.0814490
# 10, October 2015
DOI: 10.7463/1015.0814490
pp. 21-35
The Optimizing Method of the Coordinates in the Lathe Cutting Zone
# 10, October 2015
DOI: 10.7463/1015.0823142
# 10, October 2015
DOI: 10.7463/1015.0823142
pp. 36-46
Research of Thermo-Hydraulic Pin-Type Radiator Efficiency for Electronic Device Cooling
# 11, November 2015
DOI: 10.7463/1115.0817314
# 11, November 2015
DOI: 10.7463/1115.0817314
pp. 153-166
Numerical Simulation of a Grinding Process for the Spatial Work-pieces: a Model of the Work-piece and Grinding Wheel
# 09, September 2015
DOI: 10.7463/0915.0814388
# 09, September 2015
DOI: 10.7463/0915.0814388
pp. 1-16
Numerical Simulation of a Grinding Process for the Spatial Work-pieces: Modeling of Grinding Forces and System Dynamics
# 10, October 2015
DOI: 10.7463/1015.0814410
# 10, October 2015
DOI: 10.7463/1015.0814410
pp. 47-64
Effect of Forging Allowance Value on the Power Consumption of Machining Process
# 10, October 2015
DOI: 10.7463/1015.0815492
# 10, October 2015
DOI: 10.7463/1015.0815492
pp. 65-73
Determination of the Tapping Part Diameter of the Thread Mill
# 10, October 2015
DOI: 10.7463/1015.0821197
# 10, October 2015
DOI: 10.7463/1015.0821197
pp. 74-87
Modelling of Operational Cycle in a Hydraulic Drive Based on Adjustable Axial Piston Hydraulic Machines
# 09, September 2015
DOI: 10.7463/0915.0812337
# 09, September 2015
DOI: 10.7463/0915.0812337
pp. 17-31
| Authors |
| Press-releases |
| Library |
| Conferences |
| About Project |
| Phone: +7 (915) 336-07-65 (строго: среда; пятница c 11-00 до 17-00) |  |
 |
|||
| © 2003-2024 «Наука и образование» Перепечатка материалов журнала без согласования с редакцией запрещена Phone: +7 (915) 336-07-65 (строго: среда; пятница c 11-00 до 17-00) | |||||